Mounting a trolling motor on an aluminium boat may need the use of different components than on a fibreglass or wooden boat. Aluminum boats are popular due to their durability and inexpensive cost; but, if your aluminium boat lacks the proper base to place your trolling motor, you may need to alter some of the original equipment or acquire other items before installing it. We will walk you through the steps and requirements for installing a trolling motor on your aluminium boat. You can surf for which is better 12 volt or 24 volt trolling motor

• The first thing you should do is check the original equipment to see if your boat has a base. Some boats come with one pre-installed, but most of the time you will need to purchase it separately in order to put your trolling motor. This is due to the fact that manufacturers would rather offer an assembled package than a boat with all essential mounting parts.
• When purchasing a base, bear in mind that there are many various types available. Some bases may be used on both vertical and horizontal surfaces, and others are meant for only one type of surface.
• This type of information should be provided at the place where you make your purchase, so read all descriptions that contain this type of information carefully before purchasing anything.
• If you intend to use your trolling motor at least once or twice a week, get one with the finest shock absorption mechanism. Because aluminium boats are lighter than fibreglass and wooden boats, they frequently shift as they hit minor waves with minimal resistance from the water.

• This type of motion can harm not just your boat but also your equipment, especially if it is situated on a thin platform that cracks readily under pressure from sudden motions. It is better to know which is better 12 volt or 24 volt trolling motor, so you can choose the best one.
• Because of the amount of power they provide, different boats require different types of trolling motors. The distance you can go with your trolling motor before it drains your boat’s battery is determined by the amount of power it produces, not by where you place it on your aluminium boat.
• Please remember to include the rubber washer between the trolling motor base and your boat’s wall since it is important for making an airtight seal and preventing water from escaping through the battery compartment, which will house all of your wiring.
• Trolling motors are used for a variety of purposes, includes fishing side and transom mounts that are the two most common types. The manner in which each is mounted differs, but the manner in which they are connected remains constant. The same is true for plugs and cables.
• Always use washers on each bolt and connect cables to opposite sides as needed to avoid future electrical connection issues or when operating motors in rough conditions such as heavy seas.